398
edits
Changes
Undo revision 2945 by [[Special:Contributions/imported>Pew|imported>Pew]] ([[User talk:imported>Pew|talk]])
The '''PICKit 2''' is a microprocessor programming and debugging peripheral. {{#if: {{{use|}}} | {{{use}}} | }} Below are instructions on how to get it working on Linux. {{Template:Version|Ubuntu 10.04}} ==Group Account==You'll need to add a group for the device and add yourself to that group.<pre>$ sudo addgroup embedded$ sudo addgroup $USER embedded</pre> ==Udev Rules==Now you need to ask udev to give the recently created group permission to access the USB device.<pre>$ echo '#PICKitATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0032", MODE="0660", GROUP="embedded"#PICKit2ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0033", MODE="0660", GROUP="embedded"#PICKit3ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="900a", MODE="0660", GROUP="embedded"#ICD2ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8000", MODE="0660", GROUP="embedded" #ICD21ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8001", MODE="0660", GROUP="embedded"' | sudo tee /etc/udev/rules.d/25-embedded.rules >/dev/null</pre> ==Apply the Rules==Use the following line and plug the PICKit in and out to make the rules apply.<pre>$ sudo service udev reload</pre> ==Compile pk2cmd==<pre>$ sudo apt-get install build-essential libusb-dev$ wget http://ww1.microchip.com/downloads/en/DeviceDoc/pk2cmdv1.20LinuxMacSource.tar.gz$ tar xf pk2cmdv1.20LinuxMacSource.tar.gz$ cd pk2cmdv1.20LinuxMacSource$ make linux</pre> ==See Also==* [[PIC]]* [[udev]] ==External Links==* [http://sync-signal.com/2010/01/getting-started-with-pickit2-on-ubuntu-9-10/ Getting Started with a PICKit 2 on Ubuntu 9.10] [[Category:Hardware]][[Category:Pending deletionHowtos]]
