Deprecated Network

From the Linux and Unix Users Group at Virginia Teck Wiki
Revision as of 01:55, 4 January 2018 by imported>Pew
Jump to: navigation, search

TODO: Change Name to "Deprecated Network Architecture"

IPs

DNS Global IPv4 Purpose
security.ece.vt.edu 128.173.88.161 Milton's IP until luug IPs got routed behind router.ece.vt.edu
cvl05.ece.vt.edu 128.173.88.145 Snapfeed's IP, reclaimed by bmckagen
dog.ece.vt.edu 128.173.88.131 We have a Sun box labeled "dog.ece.vt.edu" but the IP appears to be in use now for VMware ESXi.

ECE Server Closet

Limitations

We are behind the ECE Whittemore NAT, which is on a single 100 Mbps CNS port. We have the following limitations:

  • All adjustments to ECE DNS must be made through Brandon Russell
  • IP addresses are difficult to claim, because they must be forwarded through the NAT
  • IPv6 is not supported behind the Whittemore NAT

Consequently, We must:

  • Use an IPv6 tunnel if we want access to IPv6 addresses
  • Keep all internal services (like NFS) on an internal network

Desired Setup

This is what I'm hoping to migrate us to:

  • OpenWrt (odhcpd has built-in NDP proxying) or pfSense Router
  • An internal network smaller than a /8 (room for expansion)
    • Done: 10.99.0.0/16
  • IPsec (point-to-point and road warrior for users)
    • Can be done through openWRT or pfSense
  • Each VM host has a bridged ethernet port with a global IPv4 address and performs NAT to its VMs. Additional IPv4s are assigned as VMs as needed (e.g. milton and acidburn probably need their own)
  • All internal IPv4 addresses are static leases assigned by the router or set statically and documented somewhere; hypervisors do not have their own networks unnecessarily like wood currently does.
    • Internal network on cyberdelia has static IPs or long-term leases.
    • Cyberdelia still has too many internal networks, most of which are unnecessary.
  • Each device has a global IPv6 address
    • Currently provided through tunnel


CVL setup (deprecated)

Hardware:

  • "luugtemp" or "temp88191": a Poweredge 2650 with 2 NICs configured as an Ubuntu router
  • 8-port Gigabit unmanaged switch
  • 48-port 100 Mbps managed switch (attached to sunway)

Port security evasion:

  • A bash script named "Nat" which presumably does 1-to-1 NAT
  • NDP proxying via https://npd6.github.io/npd6/
    • This is broken an misconfigured. It doesn't properly add routes.

IPs / networks:

  • temp88191 is 10.0.0.1/8 and 128.173.88.191. It provides DHCP on our internal interface
  • Sunway has static IPs setup (10.0.97.10 to 10.0.97.28)
  • Rackable servers: joey (10.0.4.10) and phantomphreak (10.0.4.11)
  • cyberdelia's IPv4 is luug0.ece.vt.edu
    • Port 9001 <-> 10.0.1.3 (cerealkiller)
    • Port 9030 <-> 10.0.1.3 (cerealkiller)
  • wood's IPv4 is luug1.ece.vt.edu
  • milton's IPv4 is luug2.ece.vt.edu
  • luug3.ece.vt.edu is (in theory) used by westinghouse (sunway's head node)
  • acidburn's IPv4 is luug.ece.vt.edu
  • acidburn has iodine configured as a DNS tunnel (10.152.78.1/27)
  • Other tenants of our router: mjh.ece.vt.edu and mirror.ece.vt.edu
  • 10.99.0.2/24 appears to be statically assigned to wood's guests.

Cyberdelia VMs - assigned 10.0.1.1/24 (not actually a separate subnet):

  • dhcp-host=52:54:00:14:df:c2,10.0.1.1 # "mail" (not yet configured)
  • dhcp-host=52:54:00:68:81:33,10.0.1.2 # crashoverride 2.0
  • dhcp-host=52:54:00:40:9a:55,10.0.1.3 # Cerealkiller 2.0