Difference between revisions of "PICKit 2"

From the Linux and Unix Users Group at Virginia Teck Wiki
Jump to: navigation, search
imported>Cov
(Apply the Rules)
imported>Cov
(Apply the Rules)
Line 27: Line 27:
 
==Apply the Rules==
 
==Apply the Rules==
 
Use the following line or maybe just plug the PICKit in and out(?) to make the rules apply. A reload may also work.
 
Use the following line or maybe just plug the PICKit in and out(?) to make the rules apply. A reload may also work.
<pre>sudo service udev restart
+
<pre>$ sudo service udev restart
 
</pre>
 
</pre>
  

Revision as of 22:13, 16 March 2011

The PICKit 2 is a microprocessor programming and debugging peripheral. It is used in ECE 4534 Embedded System Design. Below are instructions on how to get it working.

The following instructions were written for Ubuntu 10.04 and may not work on other platforms or versions. If you would like to see additional coverage, please add it yourself or make a request on the wiki's wanted page.

Group Account

You'll need to add a group for the device and add yourself to that group.

$ sudo addgroup embedded
$ sudo addgroup $USER embedded

Udev Rules

Now you need to ask udev to give the recently created group permission to access the USB device.

$ echo '#PICKit
SYSFS{idVendor}=="04d8", SYSFS{idProduct}=="0032", MODE="0660", GROUP="embedded"
#PICKit2
SYSFS{idVendor}=="04d8", SYSFS{idProduct}=="0033", MODE="0660", GROUP="embedded"
#PICKit3
SYSFS{idVendor}=="04d8", SYSFS{idProduct}=="900a", MODE="0660", GROUP="embedded"
#ICD2
SYSFS{idVendor}=="04d8", SYSFS{idProduct}=="8000", MODE="0660", GROUP="embedded" 
#ICD21
SYSFS{idVendor}=="04d8", SYSFS{idProduct}=="8001", MODE="0660", GROUP="embedded"' | sudo tee /etc/udev/rules.d/25-embedded.rules

Apply the Rules

Use the following line or maybe just plug the PICKit in and out(?) to make the rules apply. A reload may also work.

$ sudo service udev restart

Compile pk2cmd

$ sudo apt-get install build-essential libusb-dev
$ wget http://ww1.microchip.com/downloads/en/DeviceDoc/pk2cmdv1.20LinuxMacSource.tar.gz
$ tar xf pk2cmdv1.20LinuxMacSource.tar.gz
$ cd pk2cmdv1.20LinuxMacSource
$ make linux

See Also

External Links