PIC

PIC microcontrollers are a RISC line from Microchip. They are used in ECE 2504 Introduction to Computer Engineering and ECE 4534 Embedded System Design.

Compiling Code

MPLAB is IDE recommended by the ECE department. It can be run inside a Virtual Machine, programming using USB passthrough. It can also be installed under wine and the compiler used from the commandline. sdcc is reported to work, and pikdev has a C compiler for the PIC as well.

Using Wine to Run the Toolchain

The MCC18 toolchain can be run using wine. This page should be updated to give more detailed instructions.

Makefile Using Wine

The file below is a work in progress.

# Hacked up makefile for Linux

export WINEPREFIX = /home/user/class/embedded/pic/toolchain
MCCPATH = $(WINEPREFIX)/drive_c/MCC18/bin
CC = wine $(MCCPATH)/mcc18.exe
CFLAGS =  --extended -Opa-
# -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
LD = wine $(MCCPATH)/mplink.exe
AR = wine $(MCCPATH)/mplib.exe
PK2PATH = /home/user/class/embedded/pic/pk2cmd/pk2cmdv1.20LinuxMacSource
PK2CMD = $(PK2PATH)/pk2cmd
RM = rm

Proj1.cof : main.o messages.o interrupts.o user_interrupts.o my_uart.o uart_thread.o timer1_thread.o timer0_thread.o my_i2c.o
	$(LD) /p18F2680 /l"C:\MCC18\lib" "main.o" "messages.o" "interrupts.o" "user_interrupts.o" "my_uart.o" "uart_thread.o" "timer1_thread.o" "timer0_thread.o" "my_i2c.o" /u_CRUNTIME /u_EXTENDEDMODE /z__MPLAB_BUILD=1 /m"Proj1.map" /w /o"Proj1.cof"

main.o : main.c ../toolchain/drive_c/MCC18/h/stdio.h ../toolchain/drive_c/MCC18/h/usart.h ../toolchain/drive_c/MCC18/h/i2c.h ../toolchain/drive_c/MCC18/h/timers.h messages.h my_uart.h my_i2c.h uart_thread.h timer1_thread.h timer0_thread.h main.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h ../toolchain/drive_c/MCC18/h/pconfig.h interrupts.h
	$(CC) -p=18F2680 "main.c" -fo="main.o" $(CFLAGS)

messages.o : messages.c messages.h messages.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h interrupts.h
	$(CC) -p=18F2680 "messages.c" -fo="messages.o" $(CFLAGS)

interrupts.o : interrupts.c messages.h my_uart.h interrupts.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h interrupts.h user_interrupts.h
	$(CC) -p=18F2680 "interrupts.c" -fo="interrupts.o" $(CFLAGS)

user_interrupts.o : user_interrupts.c ../toolchain/drive_c/MCC18/h/timers.h messages.h my_uart.h user_interrupts.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h user_interrupts.h
	$(CC) -p=18F2680 "user_interrupts.c" -fo="user_interrupts.o" $(CFLAGS)

my_uart.o : my_uart.c ../toolchain/drive_c/MCC18/h/usart.h messages.h my_uart.h my_uart.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h
	$(CC) -p=18F2680 "my_uart.c" -fo="my_uart.o" $(CFLAGS)

uart_thread.o : uart_thread.c ../toolchain/drive_c/MCC18/h/stdio.h uart_thread.h uart_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h
	$(CC) -p=18F2680 "uart_thread.c" -fo="uart_thread.o" $(CFLAGS)

timer1_thread.o : timer1_thread.c ../toolchain/drive_c/MCC18/h/stdio.h messages.h timer1_thread.h timer1_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h
	$(CC) -p=18F2680 "timer1_thread.c" -fo="timer1_thread.o" $(CFLAGS)

timer0_thread.o : timer0_thread.c ../toolchain/drive_c/MCC18/h/stdio.h timer0_thread.h timer0_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h
	$(CC) -p=18F2680 "timer0_thread.c" -fo="timer0_thread.o" $(CFLAGS)

my_i2c.o : my_i2c.c ../toolchain/drive_c/MCC18/h/i2c.h messages.h my_i2c.h my_i2c.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h
	$(CC) -p=18F2680 "my_i2c.c" -fo="my_i2c.o" $(CFLAGS)

clean : 
	$(RM) "main.o" "messages.o" "interrupts.o" "user_interrupts.o" "my_uart.o" "uart_thread.o" "timer1_thread.o" "timer0_thread.o" "my_i2c.o" "Proj1.cof" "Proj1.hex" "Proj1.map"

prog : Proj1.hex
	$(PK2CMD) -A3.3 -B$(PK2PATH) -P -M -FProj1.hex -Y -T

Programming

See the PICKit 2 article for programming your hex file natively using pk2cmd.

Debugging

Reading printf-style debugging messages over UART with the PICKit 2 is possible from a Windows virtual machine with USB passthrough.

External Links

• How-to Program PICs using Linux - Hackaday (see article and comments)