PICKit 2
The PICKit 2 is a microprocessor programming and debugging peripheral. Below are instructions on how to get it working on Linux.
The following instructions were written for Ubuntu 10.04 and may not work on other platforms or versions. If you would like to see additional coverage, please add it yourself or make a request on the wiki's wanted page.
Contents
Group Account
You'll need to add a group for the device and add yourself to that group.
$ sudo addgroup embedded $ sudo addgroup $USER embedded
Udev Rules
Now you need to ask udev to give the recently created group permission to access the USB device.
$ echo '#PICKit
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0032", MODE="0660", GROUP="embedded"
#PICKit2
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0033", MODE="0660", GROUP="embedded"
#PICKit3
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="900a", MODE="0660", GROUP="embedded"
#ICD2
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8000", MODE="0660", GROUP="embedded"
#ICD21
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8001", MODE="0660", GROUP="embedded"' | sudo tee /etc/udev/rules.d/25-embedded.rules >/dev/null
Apply the Rules
Use the following line and plug the PICKit in and out to make the rules apply.
$ sudo service udev reload
Compile pk2cmd
$ sudo apt-get install build-essential libusb-dev $ wget http://ww1.microchip.com/downloads/en/DeviceDoc/pk2cmdv1.20LinuxMacSource.tar.gz $ tar xf pk2cmdv1.20LinuxMacSource.tar.gz $ cd pk2cmdv1.20LinuxMacSource $ make linux
