Infrastructure:Sysadmin Handbook: Difference between revisions

No edit summary
No edit summary
Line 1: Line 1:
This page describes how to manage the infra. See [https://vtluug.github.io/rtfm.txt rtfm.txt] for a guide to build it from scratch.
This page describes how to manage the infra. See [https://vtluug.github.io/rtfm.txt rtfm.txt] for a guide to build it from scratch.


This is NOT up to date as of 2019.
This covers setup of a VM on [[Infrastructure:Meltdown|meltdown]] or [[Infrastructure:Spectre|spectre]] depending on if the service is critical or not. (This guide uses [[Infrastructure:Meltdown|meltdown]] for examples)


This covers setup of a Debian 9 VM on cyberdelia. This is current as of 2017-08-19.
== Networks ==
''Further information: [[Infrastructure:Network|Network]]


== Networks ==
We ''should'' have the following networks in place:
We ''should'' have the following networks in place:


* Cyberdelia br0 on eth4 <--> eth1 on temp88191. This is the main LUUG network.
* [[Infrastructure:Meltdown|meltdown]] br0 on eno1 <--> enp4s0 on [[Infrastructure:Joey|joey]]. This is the main LUUG network.
** 10.0.0.1/22 for VTLUUG NAT (echarlie thinks we should only use a /24)
** 10.98.0.0/16 for VTLUUG NAT
** IPv6 via NDP proxying (static hosts configured in /root/scripts/router/ipv6/setup_ipv6.sh, but things should work without)
** IPv6 via prefix delegation on 607:b400:6:cc80/64
** Global IPv4s via ARP proxying (edit /root/scripts/router/ipv4/Nat and edit $Inside_Hosts). Gateway is 128.173.88.1/22.
** Global IPv4s via ARP proxying (See https://github.com/vtluug/scripts). Gateway is 128.173.88.1/22.
* Internal VM network (10.99.0.1/24). This is useful for sharing NFS insecurely, but be aware it only works on cyberdelia. If we get more VM hosts, they won't be able to use it without network reconfiguration. Several hosts also use this for LDAP
* Static hosts are on 10.98.0.0/24, and DHCP is enabled on 10.98.1.0/24. This is mainly just useful for organization and quickly finding new hosts or other hosts on the network.
* "Internet" (a CNS portal) <--> eth0 on temp88191. LUUG only has one of these, and port security is probably enabled.
** Static host IPs are assigned via static DHCP leases for IPv4.
 
** Since we can't do this with IPv6, physical host IPs are determined upon first boot and VMs are assigned a specific MAC to pre-determine the SLAAC IP.
Most of our hosts consist of a "LUUG network" eth0 as the default route and an internal network for eth1.
* "Internet" (a CNS portal) <--> enp2s0 on [[Infrastructure:Joey|joey]]. LUUG only has one of these, and port security is probably enabled.


DNS/DHCP:
DNS/DHCP:
* I think echarlie manages vtluug.org DNS? (It's on namecheap. we should unfuck this)
* All DNS entries for services run by VTLUUG are hosted on [https://gandi.net Gandi]. Ask an officer if you want to change something.
* jkh and Roddy own ece.vt.edu. DNS updates don't happen. echarlie can add IPv6-only records if needed to wuvt.vt.edu so we have PTRs.
* jkh and Roddy own ece.vt.edu. DNS updates don't happen. echarlie can add IPv6-only records if needed to wuvt.vt.edu so we have PTRs.
* temp88191 runs DHCP and dnsmasq on eth1 (that is, 10.0.0.1/22). Edit /etc/dnsmasq.conf, add your static entries, and restart dnsmasq.
* [[Infrastructure:Joey|joey]] runs DHCP via dnsmasq on enp4s0 (that is, 10.98.0.0/16). To change anything, modify it on https://github.com/vtluug/scripts first then pull that into root's homedir on [[Infrastructure:Joey|joey]]. Please don't just update it on a machine without pushing your updates.
* By default, hosts are accessible via SSH on ports 22 and 2222.
 
== Adding a VTLUUG Service VM ==
''VMs in this category are deployed to [[Infrastructure:Meltdown|meltdown]]''
 
Prerequisites:
* Clone <code>https://github.com/vtluug/scripts</code>. This is referred to as 'SCRIPTS' in this guide.
* Clone <code>https://github.com/vtluug/ansible</code> and install ansible. This repo is referred to as 'ANSIBLE' in this guide.
* Have access to the vtluug-admin repo on gitolite.
* Understand the VTLUUG network and how things work in general.
* Put your SSH key on [[Infrastructure:Meltdown|meltdown]]
 
=== Configure the network ===
* Decide on a MAC address for the host and add it to <code>SCRIPTS/router/lan/local_hosts</code>
* Add an entry to <code>SCRIPTS/router/lan/dnsmasq.conf</code> for static DHCP leases.
* If a new IP in 128.173.88.1/22 is being added, also add it to <code>SCRIPTS/router/proxy/arp_proxy.sh</code>


== Auth ==
'''Note''': It is '''not''' recommended that you do the following steps if nobody is on campus in case something breaks.
* <code>apt-get -y install sssd-ldap nscd</code>
* <code>vim /etc/sssd/sssd.conf</code>
<pre>
[sssd]
config_file_version = 2
services = nss, pam
domains = LDAP
debug_level = 5


[nss]
Pull the latest changes to <code>/root/scripts</code>, update the configuration files, and restart the services:
filter_users = root,ldap,named,avahi,haldaemon,dbus,radiusd,news,nscd
* Dnsmasq configuration is at <code>/etc/dnsmasq.conf</code>
homedir_substring = /home
* ARP Proxy configuration is in <code>/usr/local/bin</code>


[domain/LDAP]
=== Add the VM configuration to ansible ===
id_provider = ldap
Edit <code>ANSIBLE_PATH/roles/deploy-vms/defaults/main.yml</code> and add a new entry, following the existing format.
auth_provider = ldap
ldap_search_base = dc=vtluug,dc=org
ldap_tls_reqcert = allow
ldap_uri = ldaps://razor.vtluug.org
</pre>


== Storage ==
'''Note''': if there are any entries in this file that are '''not''' present on the VM host, they will also be created. Comment out entries that shouldn't be created. Existing hosts are skipped.
* <code>apt-get -y install nfs-common</code>
* <code>vim /etc/idmap.conf</code>
<pre>
[General]


Verbosity = 0
Run <code>ansible-playbook -v deploy.yml -i hosts.cfg -u papatux -k -K -e @VTLUUG_ADMIN_REPO/accounts.yml</code>, using the correct vtluug-admin repo path.
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if it differs from FQDN minus hostname
# Domain = localdomain
Domain = vtluug.org


[Mapping]
=== Testing ===
The new host should be accessible by papatux on via SSH port 2222 (and 22) over IPv6 and IPv4 from the internal network. Check 10.98.1.0/24 to see if it correctly received a DHCP lease and if the MAC is correct.


Nobody-User = nobody
Nobody-Group = nogroup
</pre>
* <code>vim /etc/fstab</code>
<pre>
10.99.0.1:/tank/nfs/home /home nfs soft,auto,nodev 0 0
10.99.0.1:/tank/nfs/share /tank/nfs/share nfs soft,auto,nodev,nosuid 0 0
10.99.0.1:/tank/nfs/scratch /tank/nfs/scratch nfs soft,auto,nodev,nosuid 0 0
10.99.0.1:/tank/nfs/files /tank/nfs/files nfs soft,auto,nodev,nosuid 0 0
</pre>
* <code>mkdir -p /tank/nfs/{share,scratch,files}</code>
* <code>systemctl restart sssd</code>
* <code>mount -a</code>


== Testing ==
== Adding a User VM ==
To verify that this worked: <code>su</code> to your user, <code>cd</code>, and you should be able to modify your files.
''VMs in this category are deployed to [[Infrastructure:Spectre|spectre]]''