Virginia Tech Wifi: Difference between revisions

imported>Mutantmonkey
No edit summary
imported>Cov
No edit summary
Line 1: Line 1:
This article describes how to set up '''PEAP-MSCHAPv2''' on various Linux distributions. PEAP-MSCHAPv2 is a wireless authentication scheme used by Virginia Tech as an alternative to [[EAP-TLS]] for connections to [[VT-Wireless]].
PEAP-MSCHAPv2 is a wireless authentication scheme used by Virginia Tech as an alternative to [[EAP-TLS]] for connections to [[VT-Wireless]].


==Set your remote access passphrase==
==Set your remote access passphrase==
Regardless of what software you use to establish your connection, you must first set your remote passphrase by going to [https://my.vt.edu my.vt.edu]->Settings->Remote Passphrase.
Regardless of what software you use to establish your connection, you must first set your remote passphrase by going to [https://my.vt.edu my.vt.edu]→Settings→Remote Passphrase.


==NetworkManager==
<!-- The rest of this page uses a template from the Uniluug project; please see https://uniluug.org/wiki/Template:EAP-TLS if you wish to edit it. -->
* In your wireless configuration program, select VT-Wireless.
{{raw:u:PEAP-MSCHAPv2|network="VT-Wireless"|credentials=PID and remote access passphrase}}
* Choose PEAP as the EAP type.
* Choose MSCHAPv2 as the authentication method.
* Use your PID and remote passphrase as your login credentials.
 
==wpa_supplicant==
Add the following lines to /etc/wpa_supplicant.conf:
network={
ssid="VT-Wireless"
proto=WPA2
key_mgmt=WPA-EAP
eap=PEAP
phase2="auth=MSCHAPV2"
identity="your PID"
password="your passphrase"
}