PIC: Difference between revisions
imported>Cov Created page with "'''PIC''' microcontrollers are a RISC line from Microchip. They are used in ECE 2504 Introduction to Computer Engineering and [[ECE 45..." |
imported>Cov No edit summary |
||
| Line 1: | Line 1: | ||
'''PIC''' microcontrollers are a [[w:Reduced_instruction_set_computing|RISC]] line from Microchip. They are used in [[ECE 2504 Introduction to Computer Engineering]] and [[ECE 4534 Embedded System Design | '''PIC''' microcontrollers are a [[w:Reduced_instruction_set_computing|RISC]] line from Microchip. They are used in [[ECE 2504 Introduction to Computer Engineering]] and [[ECE 4534 Embedded System Design]]. | ||
==Compiling Code== | ==Compiling Code== | ||
MPLAB is IDE recommended by the ECE department. It can be run inside a Virtual Machine, programming using USB passthrough. It can also be installed under wine and the compiler used from the commandline. sdcc is reported to work, and pikdev has a C compiler for the PIC as well. | MPLAB is IDE recommended by the ECE department. It can be run inside a Virtual Machine, programming using USB passthrough. It can also be installed under wine and the compiler used from the commandline. sdcc is reported to work, and pikdev has a C compiler for the PIC as well. | ||
==Makefile Using Wine== | ===Using Wine to Run the Toolchain=== | ||
The MCC18 toolchain can be run using wine. This page should be updated to give more detailed instructions. | |||
===Makefile Using Wine=== | |||
The file below is a work in progress. | |||
<pre> | <pre> | ||
# Hacked up makefile for Linux | |||
export WINEPREFIX = /home/user/class/embedded/pic/toolchain | |||
MCCPATH = $(WINEPREFIX)/drive_c/MCC18/bin | |||
CC = wine $(MCCPATH)/mcc18.exe | |||
CFLAGS = --extended -Opa- | |||
# -D__DEBUG -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa- | |||
LD = wine $(MCCPATH)/mplink.exe | |||
AR = wine $(MCCPATH)/mplib.exe | |||
PK2PATH = /home/user/class/embedded/pic/pk2cmd/pk2cmdv1.20LinuxMacSource | |||
PK2CMD = $(PK2PATH)/pk2cmd | |||
RM = rm | |||
Proj1.cof : main.o messages.o interrupts.o user_interrupts.o my_uart.o uart_thread.o timer1_thread.o timer0_thread.o my_i2c.o | |||
$(LD) /p18F2680 /l"C:\MCC18\lib" "main.o" "messages.o" "interrupts.o" "user_interrupts.o" "my_uart.o" "uart_thread.o" "timer1_thread.o" "timer0_thread.o" "my_i2c.o" /u_CRUNTIME /u_EXTENDEDMODE /z__MPLAB_BUILD=1 /m"Proj1.map" /w /o"Proj1.cof" | |||
CC = | main.o : main.c ../toolchain/drive_c/MCC18/h/stdio.h ../toolchain/drive_c/MCC18/h/usart.h ../toolchain/drive_c/MCC18/h/i2c.h ../toolchain/drive_c/MCC18/h/timers.h messages.h my_uart.h my_i2c.h uart_thread.h timer1_thread.h timer0_thread.h main.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h ../toolchain/drive_c/MCC18/h/pconfig.h interrupts.h | ||
$(CC) -p=18F2680 "main.c" -fo="main.o" $(CFLAGS) | |||
messages.o : messages.c messages.h messages.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h interrupts.h | |||
$(CC) -p=18F2680 "messages.c" -fo="messages.o" $(CFLAGS) | |||
interrupts.o : interrupts.c messages.h my_uart.h interrupts.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h interrupts.h user_interrupts.h | |||
$(CC) -p=18F2680 "interrupts.c" -fo="interrupts.o" $(CFLAGS) | |||
user_interrupts.o : user_interrupts.c ../toolchain/drive_c/MCC18/h/timers.h messages.h my_uart.h user_interrupts.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h user_interrupts.h | |||
$(CC) -p=18F2680 "user_interrupts.c" -fo="user_interrupts.o" $(CFLAGS) | |||
my_uart.o : my_uart.c ../toolchain/drive_c/MCC18/h/usart.h messages.h my_uart.h my_uart.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h | |||
$(CC) -p=18F2680 "my_uart.c" -fo="my_uart.o" $(CFLAGS) | |||
uart_thread.o : uart_thread.c ../toolchain/drive_c/MCC18/h/stdio.h uart_thread.h uart_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h | |||
$(CC) -p=18F2680 "uart_thread.c" -fo="uart_thread.o" $(CFLAGS) | |||
timer1_thread.o : timer1_thread.c ../toolchain/drive_c/MCC18/h/stdio.h messages.h timer1_thread.h timer1_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h | |||
$(CC) -p=18F2680 "timer1_thread.c" -fo="timer1_thread.o" $(CFLAGS) | |||
.c.o: | timer0_thread.o : timer0_thread.c ../toolchain/drive_c/MCC18/h/stdio.h timer0_thread.h timer0_thread.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/stdarg.h ../toolchain/drive_c/MCC18/h/stddef.h | ||
$(CC) -p=18F2680 "timer0_thread.c" -fo="timer0_thread.o" $(CFLAGS) | |||
my_i2c.o : my_i2c.c ../toolchain/drive_c/MCC18/h/i2c.h messages.h my_i2c.h my_i2c.c maindefs.h ../toolchain/drive_c/MCC18/h/p18f2680.h ../toolchain/drive_c/MCC18/h/pconfig.h | |||
$(CC) -p=18F2680 "my_i2c.c" -fo="my_i2c.o" $(CFLAGS) | |||
clean : | |||
$(RM) "main.o" "messages.o" "interrupts.o" "user_interrupts.o" "my_uart.o" "uart_thread.o" "timer1_thread.o" "timer0_thread.o" "my_i2c.o" "Proj1.cof" "Proj1.hex" "Proj1.map" | |||
prog : Proj1.hex | |||
$(PK2CMD) -A3.3 -B$(PK2PATH) -P -M -FProj1.hex -Y -T | |||
</pre> | </pre> | ||
== | ==Programming== | ||
See the [[PICKit 2]] article for programming your hex file natively using <code>pk2cmd</code>. | |||
==Debugging== | |||
Reading printf-style debugging messages over UART with the PICKit 2 is possible from a Windows virtual machine with USB passthrough. | |||
==External Links== | ==External Links== | ||
* [[http://hackaday.com/2010/11/03/how-to-program-pics-using-linux/ How-to Program PICs using Linux - Hackaday]] (see article and comments) | * [[http://hackaday.com/2010/11/03/how-to-program-pics-using-linux/ How-to Program PICs using Linux - Hackaday]] (see article and comments) | ||