MicroBlaze: Difference between revisions

imported>Cov
No edit summary
Undo revision 694 by [[Special:Contributions/imported>Pew|imported>Pew]] ([[User talk:imported>Pew|talk]])
Tag: Undo
 
(8 intermediate revisions by 6 users not shown)
Line 24: Line 24:
Select all default options, allow the program to launch vmware-toolbox
Select all default options, allow the program to launch vmware-toolbox


Add the following to /etc/rc.local (then sudo chmod +x /etc/rc.local):
Add the following to /etc/rc.local (then <code>sudo chmod +x /etc/rc.local</code>):
<pre>
<pre>
   /usr/bin/vmware-user &
   /usr/bin/vmware-user &
Line 38: Line 38:
===Supporting Libraries===
===Supporting Libraries===
Install libusb:
Install libusb:
<pre>
<pre>
   sudo apt-get install libusb-0.1-4
   sudo apt-get install libusb-0.1-4
</pre>
</pre>
Line 48: Line 48:


==Xilinx Tool Installation==
==Xilinx Tool Installation==
Install Xilinx ISE Webpack (do '''not''' install cable drivers or XilinxUpdate), then run the following commands:
[[Install Xilinx ISE Webpack]] (do '''not''' install cable drivers or XilinxUpdate), then run the following commands:
<pre>
<pre>
   sudo sed /opt/Xilinx/11.1/ISE/bin/lin/xusbdfwu.rules -e 's:TEMPNODE:tempnode:g' > /etc/udev/rules.d/xusbdfwu.rules
   sudo sed /opt/Xilinx/11.1/ISE/bin/lin/xusbdfwu.rules -e 's:TEMPNODE:tempnode:g' > /etc/udev/rules.d/xusbdfwu.rules
Line 56: Line 56:
   sudo restart udev
   sudo restart udev
</pre>
</pre>
**Note, for the first command you may receive a permissions error.  Try the command "sudo su" to get a root shell then run the same command sans 'sudo'
**Note, for the first command you may receive a permissions error.  Try the command <code>sudo su</code> to get a root shell then run the same command sans 'sudo'


* Plug in the Spartan 3E board.  Apply power and attach the USB cable between the board and computer.  If everything has been done successfully, a greed LED will illuminate next to the USB receptacle on the boad.  If unsuccessful, the red LED will be dimly lit.
* Plug in the Spartan 3E board.  Apply power and attach the USB cable between the board and computer.  If everything has been done successfully, a greed LED will illuminate next to the USB receptacle on the boad.  If unsuccessful, the red LED will be dimly lit.
Line 62: Line 62:
* Install the Xilinx EDK (SDK and Chipscope if required)
* Install the Xilinx EDK (SDK and Chipscope if required)


===Installing the libusb-driver===
===Installing libusb-driver===
Install libusb-dev and git:
Install libusb-dev and git:
<pre>
<pre>
Line 93: Line 93:
</pre>
</pre>


Add the following lines to /opt/Xilinx/11.1/settings32.sh just after list=""
Add the following lines to /opt/Xilinx/11.1/settings32.sh just after <code>list=""</code>
<pre>
<pre>
   export XIL_IMPACT_USE_LIBUSB=0
   export XIL_IMPACT_USE_LIBUSB=0
Line 103: Line 103:
</pre>
</pre>


*Note if you wish to create a launcher in the desktop environment, use the following format for the 'command' and it will automatically source the settings32.sh before launching the application:
<pre>
  /bin/bash -c 'source /opt/Xilinx/11.1/settings32.sh && ise'
</pre>
Sources and Other Contributors:
Sources and Other Contributors:
Via (VTLUUG member)
Via (VTLUUG member)
Line 130: Line 134:
When you're done, type <code>exit</code> on the command line to quit xmd.
When you're done, type <code>exit</code> on the command line to quit xmd.


=Programming the Board=
If you're given a self-extracting archive, create a directory and
move the file to it to avoid getting "tar bombed" and unzip it. Replace
"update-s09-2" with the name of your file.
<pre>NAME=update-s09-2
mkdir ${NAME}
mv ${NAME}.exe ${NAME}
cd ${NAME}
unzip ${NAME}.exe
</pre>
Now you should see a file called "update.bat". You can take a look
at its contents to get a clue about the commands we'll need to run.
<pre>less update.bat
</pre>
Use the arrow keys or page up/down keys to navigate and press q to quit.
Essentially, we just need to run Xilinx's [http://www.xilinx.com/products/design_tools/logic_design/design_entry/impact.htm impact] programmer with the given file.
The script given to us will have a Windows-style path to where the
self-extracting archive would have unpacked itself. Run the following
command to fix this:


<pre>sed -i s/'c:\\.*\\'/'.\/'/ ProgramBoot.cmd
</pre>
Now all we need to do is run the programmer. Make sure the Xilinx
tools are in your path and that the Spartan board is connected via USB
and powered on.
<pre>impact -batch ProgramBoot.cmd
</pre>
=Cable Lock Workaround=
=Cable Lock Workaround=
Sometimes you'll get an error with cable locking. Typing the following into xmd should fix this.
Sometimes you'll get an error with cable locking. Typing the following into xmd should fix this.
Line 169: Line 144:
[http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver]
[http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver]


[[Category:Electrical and Computer Engineering]]
[[Category:Campus_computing_resources]]
[[Category:Classwork]]
[[Category:Software]]
[[Category:Scripts]]
[[Category:Scripts]]