MicroBlaze: Difference between revisions
imported>Pew Replaced content with "Category:Pending deletion" |
Undo revision 694 by [[Special:Contributions/imported>Pew|imported>Pew]] ([[User talk:imported>Pew|talk]]) Tag: Undo |
||
| Line 1: | Line 1: | ||
[[Category: | =Setting Up Xilinx Utilities= | ||
{{Template:Version|Xubuntu 9.10 running on a VMware player virtual machine}} | |||
Note that some utilities such as 'impact' are capable of using the libusb driver, while others such as 'xmd' must use the libusb-driver driver. libusb-0.1.4 is installed generally by default in *ubuntu distributions and should be available (but the udev magic still has to happen for the cable to work). In this install, we specify use of the libusb-driver by adding some lines in /opt/Xilinx/11.1/settings32.sh | |||
==Operating System== | |||
* Install Xubuntu virtual machine | |||
* Update OS | |||
* Reboot (to load latest kernel) | |||
===Re-Install VMware tools=== | |||
<pre> | |||
sudo apt-get install build-essential linux-headers-`uname -r` psmisc | |||
</pre> | |||
(Install VMWare tools through host menu) | |||
Unzip tarball from /mnt/cdrom (or cdrom1) to local dir (such as ~/): | |||
<pre> | |||
cd ~/vmware-tools-distrib | |||
sudo ./vmware-install.pl | |||
</pre> | |||
Select all default options, allow the program to launch vmware-toolbox | |||
Add the following to /etc/rc.local (then <code>sudo chmod +x /etc/rc.local</code>): | |||
<pre> | |||
/usr/bin/vmware-user & | |||
</pre> | |||
Add the following to /etc/fstab: | |||
<pre> | |||
.host:/ /mnt/hgfs vmhgfs user,defaults 0 0 | |||
</pre> | |||
Reboot (Verify any shared folders are now mounted on /mnt/hgfs) (Verify vmware-user is running with: <code>ps ax | grep vmware</code>) | |||
===Supporting Libraries=== | |||
Install libusb: | |||
<pre> | |||
sudo apt-get install libusb-0.1-4 | |||
</pre> | |||
Install fxload: | |||
<pre> | |||
sudo apt-get install fxload | |||
</pre> | |||
==Xilinx Tool Installation== | |||
[[Install Xilinx ISE Webpack]] (do '''not''' install cable drivers or XilinxUpdate), then run the following commands: | |||
<pre> | |||
sudo sed /opt/Xilinx/11.1/ISE/bin/lin/xusbdfwu.rules -e 's:TEMPNODE:tempnode:g' > /etc/udev/rules.d/xusbdfwu.rules | |||
sudo cp /opt/Xilinx/11.1/ISE/bin/lin/xusb*.hex /usr/share/ | |||
sudo restart udev | |||
</pre> | |||
**Note, for the first command you may receive a permissions error. Try the command <code>sudo su</code> to get a root shell then run the same command sans 'sudo' | |||
* Plug in the Spartan 3E board. Apply power and attach the USB cable between the board and computer. If everything has been done successfully, a greed LED will illuminate next to the USB receptacle on the boad. If unsuccessful, the red LED will be dimly lit. | |||
* Install the Xilinx EDK (SDK and Chipscope if required) | |||
===Installing libusb-driver=== | |||
Install libusb-dev and git: | |||
<pre> | |||
sudo apt-get install libusb-dev git-core | |||
</pre> | |||
Download libusb-driver sources: | |||
<pre> | |||
cd ~/ | |||
git clone git://git.zerfleddert.de/usb-driver | |||
</pre> | |||
Compile and install libusb driver | |||
<pre> | |||
cd usb-driver/ | |||
make | |||
make lib32 | |||
sudo cp libusb-drive.so /usr/local/lib/ | |||
</pre> | |||
Create a script in /etc/profile.d/ with the following contents: | |||
<pre> | |||
#!/bin/bash | |||
export PATH="$PATH/opt/Xilinx/EDK/bin/lin:/opt/Xilinx/11.1/EDK/gnu/microblaze/lin/bin/:/opt/Xilinx/11.1/SDK/bin/lin:/opt/Xilinx/11.1/ISE/bin/lin" | |||
</pre> | |||
Make the script executable: | |||
<pre> | |||
sudo chmod +x /etc/profile.d/xlilnx-settings.sh | |||
</pre> | |||
Add the following lines to /opt/Xilinx/11.1/settings32.sh just after <code>list=""</code> | |||
<pre> | |||
export XIL_IMPACT_USE_LIBUSB=0 | |||
export LD_PRELOAD=/usr/local/lib/libusb-driver.so | |||
</pre> | |||
16) Prior to launching a Xilinx tool (such as xmd), you must type the following command: | |||
<pre> | |||
source /opt/Xilinx/11.1/settings32.sh | |||
</pre> | |||
*Note if you wish to create a launcher in the desktop environment, use the following format for the 'command' and it will automatically source the settings32.sh before launching the application: | |||
<pre> | |||
/bin/bash -c 'source /opt/Xilinx/11.1/settings32.sh && ise' | |||
</pre> | |||
Sources and Other Contributors: | |||
Via (VTLUUG member) | |||
[http://forums.xilinx.com/xlnx/board/message?board.id=INSTALLBD&message.id=825 forums.xilinx.com] | |||
[http://wiki.archlinux.org/index.php/Xilinx_ISE_WebPACK wiki.archlinux.org] | |||
=Makefile Tricks= | |||
==Automatic Download== | |||
This automatically downloads your program to the Spartan board after | |||
building. It assumes $(NAME).elf is the file you'd like to download. | |||
Note that you will probably miss warning messages regarding your code | |||
so you might want to first run make normally. | |||
<pre>dl: $(NAME).elf | |||
echo 'dow $(NAME).elf' > xmd.ini | |||
echo 'run' >> xmd.ini | |||
xmd | |||
rm xmd.ini | |||
</pre> | |||
When you're done, type <code>exit</code> to quit xmd. | |||
==Automatic Debug== | |||
<pre>debug: $(NAME).elf | |||
mb-gdb & | |||
xmd | |||
</pre> | |||
When you're done, type <code>exit</code> on the command line to quit xmd. | |||
=Cable Lock Workaround= | |||
Sometimes you'll get an error with cable locking. Typing the following into xmd should fix this. | |||
<pre>xclean_cablelock | |||
</pre> | |||
=9.x Native USB Driver= | |||
[http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver] | |||
[[Category:Campus_computing_resources]] | |||
[[Category:Software]] | |||
[[Category:Scripts]] | |||