PIC: Difference between revisions
imported>Mjh Categorization |
Undo revision 2983 by [[Special:Contributions/imported>Pew|imported>Pew]] ([[User talk:imported>Pew|talk]]) Tag: Undo |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
'''PIC''' microcontrollers are a [[w:Reduced_instruction_set_computing|RISC]] | '''PIC''' microcontrollers are a relatively popular line of [[w:Reduced_instruction_set_computing|RISC]] microcontrollers from [[w:Microchip_Technology|Microchip Technology]]. Different toolchains are required to build code between the 8-bit, 16-bit, and 32-bit data size lines. They are used in [[gp:ECE 2504 Introduction to Computer Engineering|ECE 2504 Introduction to Computer Engineering]] and [[gp:ECE 4534 Embedded System Design|ECE 4534 Embedded System Design]]. | ||
==Toolchains== | |||
===8-Bit=== | |||
The [[freeware]] [http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en536656 MCC18 toolchain] from Microchip provides libraries and will compile and link for the 8-bit data word chips such as PIC18 devices. MCC18 can be run on Linux using wine. [http://sdcc.sourceforge.net/index.php sdcc] is a [[software libre]] toolchain that supports a [http://sdcc.sourceforge.net/doc/sdccman.html/node122.html number of PIC18 devices]. | |||
===16-Bit=== | |||
To build a nonfree toolchain for Linux, use the instructions at [http://www.electricrock.co.nz/blog/microchip-c30/]. To build a completely [[software libre]] toolchain for the PIC24 or dsPIC, follow the steps below. | |||
<pre> | |||
sudo apt-get install build-essential tofrodos | |||
mkdir ~/prj/pic30 | |||
cd ~/prj/pic30 | |||
wget http://ww1.microchip.com/downloads/en/DeviceDoc/mplabalc30v3_31.tar.gz | |||
wget http://ww1.microchip.com/downloads/en/DeviceDoc/mplabc30v3_31.tar.gz | |||
wget http://www.electricrock.co.nz/c30/pic30-binutils-v01.tar.bz2 | |||
wget http://www.electricrock.co.nz/c30/pic30-gcc-v01.tar.bz2 | |||
tar xf mplabalc30v3_31.tar.gz | |||
tar xf mplabc30v3_31.tar.gz | |||
find . -type f -exec fromdos {} \; | |||
# We don't need to "fix" the search path by adding -nonfree directories | |||
tar xf pic30-binutils-v01.tar.bz2 --exclude=search-path-fix.diff | |||
tar xf pic30-gcc-v01.tar.bz2 --exclude=search-path-fix.diff | |||
for p in pic30-binutils-v01/patches/*; do patch -p0 < $p; done | |||
for p in pic30-gcc-v01/patches/*; do patch -p0 < $p; done | |||
cd acme | |||
CFLAGS=-DMCHP_VERSION=v3.31-Debian ./configure --prefix="${HOME}/prj/pic30/build" --target=pic30-coff | |||
make | |||
cd .. | |||
cd gcc-4.0.2/gcc-4.0.2 | |||
CFLAGS=-DMCHP_VERSION=v3.31-Debian ./configure --prefix="${HOME}/prj/pic30/build" --target=pic30-coff --enable-languages=c | |||
make | |||
cd ../.. | |||
</pre> | |||
===32-Bit=== | |||
==Programmers== | |||
See the [[PICKit 2]] article for programming your hex file natively using <code>pk2cmd</code>. | |||
==Integrated Development Environments== | |||
MPLAB is the freeware IDE written by Microchip. Only Windows versions of older versions were made available, although those could be run with wine and with a [[Windows virtual machine]]. The newer MPLAB X is cross-platform [[freeware]]. [http://piklab.sourceforge.net/ Piklab] is a [[software libre]] IDE for PIC microcontrollers. | |||
==Compiling Code== | ==Compiling Code== | ||
MPLAB is the IDE recommended by the ECE department. It can be run inside a Virtual Machine, programming using USB passthrough. It can also be installed under wine and the compiler used from the commandline. [http://sdcc.sourceforge.net/index.php sdcc] is a GPL C compiler with some support for PIC devices. Some GNU utilities (namely the assembler and linker, but not compiler) have been modified to support Microchip's microprocessors as part of the [http://gputils.sourceforge.net/ gputils project]. [http://piklab.sourceforge.net/ Piklab] is an IDE with support for both open source toolchains. | MPLAB is the IDE recommended by the ECE department. It can be run inside a Virtual Machine, programming using USB passthrough. It can also be installed under wine and the compiler used from the commandline. [http://sdcc.sourceforge.net/index.php sdcc] is a GPL C compiler with some support for PIC devices. Some GNU utilities (namely the assembler and linker, but not compiler) have been modified to support Microchip's microprocessors as part of the [http://gputils.sourceforge.net/ gputils project]. [http://piklab.sourceforge.net/ Piklab] is an IDE with support for both open source toolchains. | ||
MPLABX, the current version of MPLAB, runs natively under Linux. | |||
===Using Wine to Run the Toolchain=== | ===Using Wine to Run the Toolchain=== | ||
| Line 61: | Line 104: | ||
==Programming== | ==Programming== | ||
See the [[PICKit 2]] article for programming your hex file natively using <code>pk2cmd</code>. | See the [[PICKit 2]] article for programming your hex file natively using <code>pk2cmd</code>. The PICKit 3 has superceded the PICKit 2 but is lacking certain features. | ||
==Debugging Hardware== | |||
Reading printf-style debugging messages over UART with the [[PICKit 2]] is possible from a Windows virtual machine with USB passthrough. | |||
== | ===I2C=== | ||
here's a variety of useful hardware available for debugging I2C: | |||
* The [http://www.totalphase.com/products/aardvark-i2cspi/ Aardvark I2C/SPI Host Adapter] is capable of acting as either an I2C master or slave and reading and writing data over USB. There is an [https://aur.archlinux.org/packages/aardvark-gui/ AUR package] for the Aardvark GUI for 32-bit machines. VTLUUG [https://vtluug.org/files/aardvark/ mirrors] other Aardvark files since they are no longer available on the vendor's website. The Aardvark also works well in a VM with USB passthrough. | |||
* A [[Raspberry Pi]] has two onboard I2C buses and should be able to act as a master or slave. Performance and reliability may be suboptimal. | |||
* A [[Bus Pirate]] can act as an I2C master or slave and is suitable for human-speed interaction. | |||
===UART=== | |||
UART can easily be debugged using an RS232 and a level shifter in the [https://en.wikipedia.org/wiki/MAX232 MAX232] family. For computers without hardware serial ports, USB to serial adapters have near-universal Linux support. For a simpler hardware setup, it may be desirable to use a Bus Pirate or Raspberry Pi as they both support 3v3 CMOS-level UART. | |||
==External Links== | ==External Links== | ||
* [http://hackaday.com/2010/11/03/how-to-program-pics-using-linux/ How-to Program PICs using Linux - Hackaday] (see article and comments) | * [http://hackaday.com/2010/11/03/how-to-program-pics-using-linux/ How-to Program PICs using Linux - Hackaday] (see article and comments) | ||
* [http://gun.io/open/43/libre-pic30-toolchain-bitbake-recipe Bounty on a libre pic30 toolchain BitBake recipe] | |||
[[Category:Hardware | [[Category:Hardware]] | ||
[[Category: | [[Category:Howtos]] | ||
[[Category:Software]] | |||
[[Category:Scripts]] | |||