imported>Pew |
imported>Pew |
| Line 1: |
Line 1: |
| − | TODO: Move to hardware page
| + | [[Category:Pending deletion]] |
| − | | |
| − | The '''PICKit 2''' is a microprocessor programming and debugging peripheral. {{#if: {{{use|}}} | {{{use}}} | }} Below are instructions on how to get it working on Linux.
| |
| − | | |
| − | {{Template:Version|Ubuntu 10.04}}
| |
| − | | |
| − | ==Group Account==
| |
| − | You'll need to add a group for the device and add yourself to that group.
| |
| − | <pre>
| |
| − | $ sudo addgroup embedded
| |
| − | $ sudo addgroup $USER embedded
| |
| − | </pre>
| |
| − | | |
| − | ==Udev Rules==
| |
| − | Now you need to ask udev to give the recently created group permission to access the USB device.
| |
| − | <pre>
| |
| − | $ echo '#PICKit
| |
| − | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0032", MODE="0660", GROUP="embedded"
| |
| − | #PICKit2
| |
| − | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="0033", MODE="0660", GROUP="embedded"
| |
| − | #PICKit3
| |
| − | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="900a", MODE="0660", GROUP="embedded"
| |
| − | #ICD2
| |
| − | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8000", MODE="0660", GROUP="embedded"
| |
| − | #ICD21
| |
| − | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="8001", MODE="0660", GROUP="embedded"' | sudo tee /etc/udev/rules.d/25-embedded.rules >/dev/null
| |
| − | </pre>
| |
| − | | |
| − | ==Apply the Rules==
| |
| − | Use the following line and plug the PICKit in and out to make the rules apply.
| |
| − | <pre>$ sudo service udev reload
| |
| − | </pre>
| |
| − | | |
| − | ==Compile pk2cmd==
| |
| − | <pre>
| |
| − | $ sudo apt-get install build-essential libusb-dev
| |
| − | $ wget http://ww1.microchip.com/downloads/en/DeviceDoc/pk2cmdv1.20LinuxMacSource.tar.gz
| |
| − | $ tar xf pk2cmdv1.20LinuxMacSource.tar.gz
| |
| − | $ cd pk2cmdv1.20LinuxMacSource
| |
| − | $ make linux
| |
| − | </pre>
| |
| − | | |
| − | ==See Also==
| |
| − | * [[PIC]]
| |
| − | * [[udev]]
| |
| − | | |
| − | ==External Links==
| |
| − | * [http://sync-signal.com/2010/01/getting-started-with-pickit2-on-ubuntu-9-10/ Getting Started with a PICKit 2 on Ubuntu 9.10]
| |
| − | [[Category:Needs restoration]] | |
