User:Cov: Difference between revisions
imported>Cov No edit summary |
imported>Echarlie No edit summary |
||
| (14 intermediate revisions by 8 users not shown) | |||
| Line 1: | Line 1: | ||
W5: Undecided between (semi) conductor in polymer, some in the polymer, some wet, all wet with resins/binders, and all wet with just hot plastic making everything stick in place. | |||
W4: For variability, shelf-life (oxidation) and constant deposit rate are key. Test patterns on silicon for after-the-fact. Resistance testing is useful/common. Laser cutter can oblate/cut sections and rely on a redundant section. Acid etching may be possible. Heating and removal may be possible. "MISFET" metal-insulator semiconductor field effect transistor. Schottky diode--metal (Schottky)-semiconductor-metal (ohmic) sandwich. Work function of metal versus electron affinity in semiconductors essentially the same. Bonds covalent. Electrons move into metal and becomes less [pn]-type. Barrier forms where electrons left and voltage happens. Difference in other direction causes flow of electrons and ohmic contact. Can either vary metal or doping. Lookup leaky / Schottky diodes versus regular pn-junction. Schottky transistors also possible. | |||
In the end we want CMOS to save material. NAND CMOS is 4 transistors. TTL has 3 transistors and 4 resistors. Also, CMOS has much better fanout. Look into verilog/VHDL output. | |||
For Thursday: carbon. Keep thinking about deposition method. Get transparencies from John. | |||
W3: Deposition method. Automatic dropper? Like an aquarium pump but very small. Called automated pipettes. Sticking to the sides depends on the charge, but Meehan hasn't encountered problems--gold and cadmium sulfide don't. | |||
W2: Carbon as the Conductor material (and potentially resistors, capacitors and inductors) | |||
Step 1: Put a wire on a substrate (paste or liquid preferable to powder) | |||
W1: document material and process choice, investigate printing, inert substrate | |||
=Materials and Processes= | |||
{| border="1" | {| border="1" | ||
|- | |- | ||
! Material | ! Material | ||
! Doping Process | ! Doping Process | ||
! Notice | |||
|- | |- | ||
| Silicon | | Silicon | ||
| | | Mix in during boule creation and ion implantation (particle acceleration with phosphorus or arsenic and boron or gallium) or furnace with gas (diffusion) | ||
| Need at least 10 kEv. Heat treatment for recrystallization (electrical activation) afterwards. Silicon dioxide mask for gas | |||
|- | |- | ||
| Organic semiconductors | | Organic semiconductors | ||
| Beaker chemistry | | Beaker chemistry, dissolve into solvent | ||
| | |||
|- | |- | ||
| Graphene | | Graphene | ||
| Doping during formation | | Doping during furnace and gas formation | ||
|- | |||
| Zinc sulfide | |||
| | |||
|- | |||
| 2-6 semiconductors | |||
| Beaker chemistry, small particle slurry | |||
|- | |- | ||
|} | |} | ||
=Conductor= | |||
* Carbon, gold don't oxidize | |||
* Aluminum, silver, copper | |||
=Recycling= | |||
* Electroplating to recover metals (different voltages for different metals)/ | |||
* Size-selective precipitation technique if p, n had different sizes | |||
* Selective etches | |||
* Focused ion beams to bombard off surface | |||
[[Category:home]] | |||
Latest revision as of 00:15, 26 March 2016
W5: Undecided between (semi) conductor in polymer, some in the polymer, some wet, all wet with resins/binders, and all wet with just hot plastic making everything stick in place.
W4: For variability, shelf-life (oxidation) and constant deposit rate are key. Test patterns on silicon for after-the-fact. Resistance testing is useful/common. Laser cutter can oblate/cut sections and rely on a redundant section. Acid etching may be possible. Heating and removal may be possible. "MISFET" metal-insulator semiconductor field effect transistor. Schottky diode--metal (Schottky)-semiconductor-metal (ohmic) sandwich. Work function of metal versus electron affinity in semiconductors essentially the same. Bonds covalent. Electrons move into metal and becomes less [pn]-type. Barrier forms where electrons left and voltage happens. Difference in other direction causes flow of electrons and ohmic contact. Can either vary metal or doping. Lookup leaky / Schottky diodes versus regular pn-junction. Schottky transistors also possible.
In the end we want CMOS to save material. NAND CMOS is 4 transistors. TTL has 3 transistors and 4 resistors. Also, CMOS has much better fanout. Look into verilog/VHDL output.
For Thursday: carbon. Keep thinking about deposition method. Get transparencies from John.
W3: Deposition method. Automatic dropper? Like an aquarium pump but very small. Called automated pipettes. Sticking to the sides depends on the charge, but Meehan hasn't encountered problems--gold and cadmium sulfide don't.
W2: Carbon as the Conductor material (and potentially resistors, capacitors and inductors) Step 1: Put a wire on a substrate (paste or liquid preferable to powder)
W1: document material and process choice, investigate printing, inert substrate
Materials and Processes
| Material | Doping Process | Notice |
|---|---|---|
| Silicon | Mix in during boule creation and ion implantation (particle acceleration with phosphorus or arsenic and boron or gallium) or furnace with gas (diffusion) | Need at least 10 kEv. Heat treatment for recrystallization (electrical activation) afterwards. Silicon dioxide mask for gas |
| Organic semiconductors | Beaker chemistry, dissolve into solvent | |
| Graphene | Doping during furnace and gas formation | |
| Zinc sulfide | ||
| 2-6 semiconductors | Beaker chemistry, small particle slurry |
Conductor
- Carbon, gold don't oxidize
- Aluminum, silver, copper
Recycling
- Electroplating to recover metals (different voltages for different metals)/
- Size-selective precipitation technique if p, n had different sizes
- Selective etches
- Focused ion beams to bombard off surface