Open main menu

Linux and Unix Users Group at Virginia Teck Wiki β

Virginia Tech Wifi (OLD)

Revision as of 16:30, 2 December 2009 by imported>Cov (Introduction)

Contents

Introduction

Since the fall of 2008, there have been two options for connecting to the Virginia Tech network by wireless card. One network, called VT-Wireless, operates by means of WPA2 Enterprise and is secured with EAP/TLS. The other network, called VT_WLAN, is an unsecured, captive portal wireless network. While connections to VT-Wireless are secure by default, and require no user authentication once set up, the setup has a number of steps. In contrast, setup for VT_WLAN network is negligible, but you will be required to manually authenticate each time you connect (although this can be scripted).

VT-Wireless VT_WLAN
Secure (Encrypted)
Connection
yes no
Setup involved trivial
Authentication automatic manual

VT-Wireless

The VT-Wireless network is secured by WPA with EAP/TLS encryption. This encryption mechanism is put in place through a certificate authentication mechanism.

Obtaining the VT-Wireless Certificate

Regardless of what program you use to make your connection, you will need to obtain your p12 certificate and password from CNS. Complete the form and download the p12 certificate file. Write down the certificate password and store it some place where you can find it again. You will need it in setting up your connection to VT-Wireless.

Connecting by NetworkManager

The setup for NetworkManager depends on your version of the software. Please follow the instructions appropriate to your version below. In GNOME, you can right-click the NetworkManager applet icon in the panel and select "About" to find the version of NetworkManager. Ubuntu users: version 0.6 ships with 8.04 Hardy Heron, and 0.7 ships with 8.10 Intrepid Ibex.

NetworkManager 0.7

Converting the certificate to PEM certificates and keys

[NOTE: The following steps are only necessary to use NetworkManager 0.7. NetworkManager 0.6 has a [#NetworkManager_0.6 more straightforward setup] and wpa_supplicant works pretty much [#Connecting_by_WPA_Supplicant out of the box] as well.] You will need to convert the p12 certificate into PEM formats. We will assume your downloaded p12 file is called netcert-1.p12 and that its password is netcertpasswd. Open a terminal and cd to the directory that contains your p12 file. Then issue the following commands:

openssl pkcs12 -in netcert-1.p12 -out vt_client_cert.pem -clcerts -nokeys
openssl pkcs12 -in netcert-1.p12 -out vt_private_key.pem -nocerts

In each step, you will be prompted for the password (netcertpasswd) that you were issued along with your p12 certificate. Additionally, in the final step where you generate your private key, you will be asked to enter a password. Enter the same password that came with your p12 key. Sources

Make sure you have the CA Certificate

Next, you will need to make sure you have the Thawte CA certificate. In Ubuntu, you should find this certificate as /etc/ssl/certs/Thawte_Premium_Server_CA.pem. If you can't find the certificate, you can copy the text below and paste it into a new file of the same name.

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----


Left-click the NetworkManager applet and select the VT-Wireless network. <a href="http://www.vtluug.org/wiki/index.php?title=Image:Nm_choose_wireless.png" class="image" title="Image:nm_choose_wireless.png"><img alt="Image:nm_choose_wireless.png" src="VT-Wireless_files/Nm_choose_wireless.html" height="255" width="313" border="0"></a> You will see a prompt to configure the connection. First, from the Authentication drop-down menu, select TLS. <a href="http://www.vtluug.org/wiki/index.php?title=Image:Nm_choose_tls.png" class="image" title="Image:nm_choose_tls.png"><img alt="Image:nm_choose_tls.png" src="VT-Wireless_files/Nm_choose_tls.html" height="466" width="494" border="0"></a> Next, fill in the rest of the options: <a href="http://www.vtluug.org/wiki/index.php?title=Image:Nm_vt_wireless_options.png" class="image" title="Image:nm_vt_wireless_options.png"><img alt="Image:nm_vt_wireless_options.png" src="VT-Wireless_files/Nm_vt_wireless_options.html" height="466" width="494" border="0"></a>

Field Value
SSID VT-Wireless
Wireless Security WPA & WPA2 Enterprise
Authentication TLS
Identity Your VT PID
User Certificate /path/to/vt_client_cert.pem
CA Certificate /etc/ssl/certs/Thawte_Premium_Server_CA.pem
Private Key /path/to/vt_private_key.pem
Private Key Password netcertpasswd

Click "Connect" and you should connect to the VT-Wireless network.

NetworkManager 0.6

Left-click the NetworkManager applet and select VT-Wireless. You will be prompted to enter information about the connection. Here are the entries you should use:

Field Value
SSID VT-Wireless
Wireless Security WPA2 Enterprise
EAP Method TLS
Key Type Automatic (Default)
Phase2 Type None (Default)
Identity Your VT PID
Password empty
Client Certificate File (None)
CA Certificate File (None)
Private Key File netcert-1.p12
(the certificate downloaded
from VT NetCert)
Private Key Password netcertpasswd

Connecting with wicd

The following instructions were written for wicd 1.6.2.2 on Ubuntu 9.10 Karmic Koala. If other versions or distributions have significantly different steps, please add those instructions or make a note of the need for them on VTLUUG Wiki:Wanted.

Wicd is an alternative to Network Manager. To install it on Debian-based systems, run sudo apt-get install wicd. Installing it will uninstall Network Manager, so make sure you already have your certificate downloaded. Unlike Network Manager, you do not need to convert the PKCS#12 certificate that CNS provides to a set of PEM certificates.

Open wicd, either from the tray icon or from Applications->Internet->Wicd Network Manager. Allow wicd to scan the wireless networks then check the "Automatically connect to this network" checkbox by the topmost VT-Wireless entry. (You do not need to check the boxes for every VT-Wireless entry. The screenshot below was made from a working configuration that automatically checked all of them.)

 

Click the "Properties" button of the topmost VT-Wireless entry and enter the following information:

  • Check the "Use these settings for all networks sharing this essid" box.
  • Leave the "Use Encryption" box checked.
  • Select EAP-TLS from the encryption type dropdown menu.
  • Enter your PID into the "Identity" box.
  • Enter the path to your private key into the "Private Key" box, i.e. /home/user/netcert/netcert-1.p12.
  • Paste the certificate password into the "Private Key Password" box.

 

Click "OK" and your computer should be all setup to use VT-Wireless.

Connecting by WPA Supplicant

Editing wpa_supplicant.conf

Add the following to your /etc/wpa_supplicant.conf file (if no file exists, create it):

network={
    ssid="VT-Wireless"
    key_mgmt=WPA-EAP
    eap=TLS
    identity="PID"
    private_key="/PATH/TO/NETCERT.p12"
    private_key_passwd="PASSWORD"
}

Replace PID with your actual PID (without any trailing @vt.edu), /PATH/TO/NETCERT.p12 with the actual path to your certificate (you can store it in /etc) and PASSWORD with the certificate password given to you when you downloaded the certificate. Note the certificate used here should be the original one you downloaded. Reformatting the certificate is only necessary for NetworkManager 0.7.

Running WPA Supplicant

Ubuntu

In Ubuntu, make sure to shut down NetworkManager with:

sudo /etc/init.d/NetworkManager stop

Next, issue the following command:

sudo wpa_supplicant -B -i wlan0 -D wext -c /etc/wpa_supplicant.conf

Confirm that you are associated with VT-Wireless

sudo iwconfig INTERFACE

where INTERFACE is your wireless card's device interface. Usually this is wlan0 but depending on udev and perhaps other system features, it might appear as ath0, eth1 or something else. Run sudo ifconfig -a to see all your interfaces listed. You should see the words Access Point: followed by a MAC address (e.g., 00:0F:23:EA:4A:01). If instead you see Access Point: not associated. Try the command again. If that still fails, bring down the interface and bring it back up

sudo ifconfig INTERFACE down
sudo ifconfig INTERFACE up

and re-issue the wpa_supplicant command. Next, obtain an IP address. In Ubuntu, this is done with

sudo dhclient INTERFACE

If all goes well, you'll obtain an IP address. Otherwise, you'll receive a timeout for your DHCP request.

Gentoo

If you're already using wpa_supplicant, just restart your interface:

# /etc/init.d/wlan0 restart

This should connect you. If you're not using wpa_supplicant, you'll need to migrate from Wireless Tools to it in order to speak WPA and 802.1X to the VT-Wireless network. Refer to the Gentoo documentation for a step-by-step guide to setting up WPA Supplicant.

Network Information Sources