Difference between revisions of "Virginia Tech Wifi"

From the Linux and Unix Users Group at Virginia Teck Wiki
Jump to: navigation, search
imported>Ram
m (Certificate Pinning: Don't really need the information about being in the directory)
imported>Wsduvall
Line 110: Line 110:
 
     'phase2="auth=MSCHAPV2"'
 
     'phase2="auth=MSCHAPV2"'
 
     'anonymous_identity="anonymous@vt.edu"'
 
     'anonymous_identity="anonymous@vt.edu"'
    'ca_cert="hash://server/sha256/216c5f2568c6e84860b12535efe93500623ccee999306b84260f951bcbd57b1a"'
 
 
   
 
   
 
     'identity="YourPidHere@vt.edu"'
 
     'identity="YourPidHere@vt.edu"'

Revision as of 21:59, 6 September 2015

There are three wireless networks on campus. One network, called VT-Wireless, encrypts all traffic and is secured with EAP-TLS or PEAP-MSCHAPv2. A second network, CONNECTtoVT-Wireless, is an unencrypted, captive portal wireless network designed to set up connecting to VT-Wireless without offering Internet access. Due to user issues faced during deployment, CONNECTtoVT-Wireless began offering captive portal access to VT users.

As of January 2015 the preferred method of wireless access at Virginia Tech is through the Eduroam network. Eduroam is a secure wireless access service that was developed for the use of research and educational institutions. One of the advantages of the Eduroam network over the VT-Wireless network is that you will be able to connect to the Internet at any participating institution using your Virginia Tech credentials. The Eduroam-US site provides a technical overview of how the network authenticates you to the Virginia Tech RADIUS servers.

General Connection Information

eduroam

The following settings are recommended for connecting to the Eduroam network:

  • SSID: eduroam
  • EAP: PEAP
  • Phase 2: MSCHAPv2
  • Identity: pid@vt.edu (So if your PID was "hokiebird", hokiebird@vt.edu)
  • Anonymous Identity: anonymous@vt.edu
  • Password: Your Network Password

Regardless of what software you use to establish your connection, you must first set your remote (network) passphrase by going to my.vt.edu→Settings→Change Network Password.

Legacy connections

It may be still possible to use older networks, but their use is deprecated in favor of eduroam and thus unsupported.

Certificate Pinning

Due to vulnerabilities in the MSCHAPv2 protocol that allow the protocol to be cracked quickly with a 100% success rate[1], it is absolutely critical that the RADIUS server certificate be validated properly before attempting authentication. Unfortunately, VT is in the process of deprecating a much stronger authentication method, EAP-TLS, and as such, network certificates will no longer be an option.

Where possible, we opt for the highest level of verification of the certificate: manually pinning the hash of the certificate we expect to be presented. The canonical form of the hash used by many network managers is the SHA256 hash of the DER encoding of the certificate.

In order to generate the certificate hash, download the certificate by clicking the "Download" link on the Certificate Search for VT-Wireless (Unfortunately this site is only available to Virginia Tech IPs)

Validate that the downloaded certificate is in fact signed by the (Now Obsolete) Virginia Tech Global Server CA chain. You will first need to download all certificates in the "CA: Virginia_Tech_Global_Server_CA" chain and concatenate them.

$ cat GlobalSignRootCA.pem GlobalSignRootSignPartnersCA.pem VirginiaTechGlobalRootCA.pem VirginiaTechGlobalServerCA.pem >> ca.pem
$ openssl verify -verbose -purpose sslserver -CAfile ca.pem VT-Wireless.cns.vt.edu.crt
VT-Wireless.cns.vt.edu.crt: OK

Then generate the sha256 hash:

$ openssl x509 -in VT-Wireless.cns.vt.edu.crt -outform der | sha256sum
216c5f2568c6e84860b12535efe93500623ccee999306b84260f951bcbd57b1a  -

It is recommended that you perform these steps yourself rather than trusting the certificate hash presented in the configurations below.

Note: As we are pinning the certificate instead of relying on a PKI, when CNS rotates the certificates being used, the configuration will need to be updated to match the new certificate.

A Word of Caution

Although you can verify connection to the Virginia Tech RADIUS servers you must keep in mind that you are connecting to a network that you do not control. It is possible that there are network monitors in place which can record and potentially modify traffic.

We encourage you to take precautions against network eavesdropping and mischief (on the Eduroam network, and in general). Potential countermeasures that one might want to employ include using HTTPS when connecting to sites, using a VPN, or using the Tor Browser Bundle.

For general tips on improving your security while using the network, consider reading the EFF's Surveillance Self-Defense tips, reading Hokie Privacy, and/or contacting the Virginia Tech Information Security Office.

NetworkManager Instructions

  • In your wireless configuration program, select eduroam.
  • Choose PEAP as the EAP type.
  • Choose MSCHAPv2 as the authentication method.
  • Use PID@vt.edu and network passphrase as your login credentials.
  • Use anonymous@vt.edu as your Anonymous Identity
  • TODO: Certificate verification (Warning, until certificate verification is added, it is not recommended that you use this method of accessing the network.)

wpa_supplicant Instructions

wpa_supplicant is a cross-platform supplicant which implements IEEE 802.1x/WPA and is used in many Linux/UNIX distributions.

In order to connect to the eduroam network, add the following to /etc/wpa_supplicant/eduroam.conf modifying the identity and password to reflect your PID and Network Password:

ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel
update_config=1
fast_reauth=1
ap_scan=1

network={
    ssid="eduroam"
    proto=RSN
    key_mgmt=WPA-EAP
    eap=PEAP
    phase2="auth=MSCHAPV2"
    anonymous_identity="anonymous@vt.edu"
    ca_cert="hash://server/sha256/216c5f2568c6e84860b12535efe93500623ccee999306b84260f951bcbd57b1a" 

    identity="YourPidHere@vt.edu"
    password="YourNetworkPasswordHere"
}

You can then connect to the network by running (where wlan0 is your wireless interface):

$ sudo wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/eduroam.conf
$ sudo dhcpcd wlan0

netctl Instructions

netctl is a network manager which is native to the ArchLinux distribution. netctl makes use of wpa_supplicant under the hood, and so the configuration is similar.

Put the following configuration in /etc/netctl/eduroam with your proper PID and Network Password. Further, this assumes that your wireless network device is wlan0, which you might have to change to match your system. The ca_cert line pins the server certificate and can be generated/validated using the mechanism described above.

Description='Federated Educational Wifi Network'
Interface=wlan0
Connection=wireless
Security=wpa-configsection

IP=dhcp
IP6=stateless

WPAConfigSection=(
    'ssid="eduroam"'
    'proto=RSN'
    'key_mgmt=WPA-EAP'
    'eap=PEAP'
    'phase2="auth=MSCHAPV2"'
    'anonymous_identity="anonymous@vt.edu"'

    'identity="YourPidHere@vt.edu"'
    'password="YourNetworkPasswordHere"'
)

Ensure that this file is owned by root and only readable by root:

$ sudo chown root:root /etc/netctl/eduroam
$ sudo chmod 600 /etc/netctl/eduroam

You can then start the connection using standard netctl methods:

$ sudo netctl start eduroam

Android Instructions

Sample Android configuration of eduroam, but crucially lacking certificate validation.

A sample configuration is available to the right, but as this configuration is currently lacking CA certificate validation, we do not at this time recommend connecting to the network.

The Identity needs to be modified to match your PID@vt.edu, and your Network Password needs to be entered in the Password field.

Steps:

  • From the home screen, press the menu button and choose "Settings"→"Wireless & networks"→"Wi-Fi settings".
  • Remove any existing entries for eduroam.
  • From the "WiFi networks" listing, click on eduroam.
  • Choose PEAP as the EAP method and MSCHAPv2 as the phase two authentication mechanism.
  • Enter your pid@vt.edu for the identity
  • Enter "anonymous@vt.edu" for the anonymous identity
  • Enter your Network Password for the password
  • Press "Connect".

TODO: Android certificate validation

Frequently Asked Questions

Is eduroam free?

Eduroam at Virginia Tech is free for:

  • VT affiliates with VT-Wireless access and network passwords
  • Users at other participating institutions

Why is eduroam the preferred SSID?

Using eduroam has several advantages:

  • Your wifi probes identify you as an eduroam user, rather than a VT affiliate
  • You have access to seamless roaming if you ever travel to another participating college campus
  • The anonymous identity feature separates RADIUS authentication logs from the network access provider's logs

The main disadvantage is that Virginia Tech's eduroam implementation does not appear to support the deprecated EAP-TLS system, while VT-Wireless does (as of February 2015).

References

Network Information Sources